VIPVIP | | RSS
    Association Introduction | Association Event | Industry Information | Member News | Special Report | Technology Exchange
 

Optically Clear, Highly Flexible Epoxy Cures at Room Temperature and Withstands Cryogenic Conditions

Enlarge Font  Decrease Font Released Date:2011-04-06   From:Master Bond   View Time:247
HACKENSACK, NJ – March 24, 2011 – For demanding applications where highly flexible, impact resistant bonds are required, Master Bond developed Polymer System EP37-3FLF. This optically clear, two component epoxy has exceptional resistance to cryogenic tem
HACKENSACK, NJ – March 24, 2011  – For demanding applications where highly flexible, impact resistant bonds are required, Master Bond developed Polymer System EP37-3FLF. This optically clear, two component epoxy has exceptional resistance to cryogenic temperatures and severe thermal cycling.  Its low exotherm also makes it a superb potting, encapsulating and casting system, especially where wider cross section thicknesses are specified. Its unique combination of properties allows it to cure without stressing delicate electronic components.

Serviceable over the wide range of 4K to 250°F, EP37-3FLF cures at room temperature in 2 to 3 days or faster at elevated temperatures. This epoxy offers a convenient, non-critical 1 to 1 mix ratio by weight or volume, and a low mixed viscosity of 1,400 to 1,500 cps. Additionally, users can work with a 100 gram mass of the adhesive at room temperature for up to 90 minutes.

EP37-3FLF has a bond shear strength exceeding 2,000 psi and a T-peel strength of 25 pli. This flexible epoxy has an elongation of 180% and superior electrical insulation properties with a volume resistivity of 1x1014 ohm-cm. It bonds well to a variety of substrates including metals, glass, ceramics, rubbers and many plastics and is widely used in the optical, electrical, electronic, computer and OEM industries.

EP37-3FLF is sold in pint, quart, gallon and 5 gallon container kits and has a 6 month shelf life if unopened and stored at room temperature.

Master Bond Low Stress Epoxies

Master Bond’s EP37-3FLF is a highly flexible, room temperature curing epoxy designed for high performance applications in many industries across a wide service temperature range. Read more about Master Bond’s low stress epoxies at http://www.masterbond.com/lp/tabs/tp_pp_lowstress.html or contact Technical Support by phone at +1-201-343-8983, by fax at +1-201-343-2132 or by e-mail at techinfo@masterbond.com.
 

CONTACT:
James Brenner, Marketing Manager
Email: jbrenner@masterbond.com
Tel: 201-343-8983
Fax: 201-343-2132

MASTER BOND INC.
154 Hobart Street
Hackensack, NJ  07601-3922
Web: www.masterbond.com
# # #
 
[ Industry InformationSearch ]  [ ]  [ Tell to Friend ]  [ Print ]  [ Close ]  [ Back to top ]

 

Recommended Picture
RecommendIndustry Information
Click Ranking
 
 
Home | About | Contact | Use Policy | Copyright privacy | Site Map | Links | Message | Advertising
Copyright 2007-2008 China Architectural and Industrial Glass Association,All Rights Reserved ICP 05037132-4 Technology support:Beijing China Glass Modern Technology Glass Co. Ltd. Contact us:bjzb@glass.org.cn;glass@glass.org.cn Tel:010-68330662 Fax:010-68349127
Powered by Destoon 2.5